Free CSS Menu Maker Css3Menu.com

Horizontal CSS3 Menus Css3Menu.com

           
Back 1 Page Next Page
               
                                   
      DITEQ is now the exclusive distributor (North and South America) for Diatip™ equipment for re tipping diamond core bits and blades. This strategic move was made to support professional core drillers who are searching for ways to control costs and streamline operations. DITEQ now handles all parts and service for Diatip™.      
      Diatip Retipping Equipment
CD 7-28 Manual
                       
      The CD 7-28 works without electrical power, without noise, without sparks, waste or scrap. Cuts off the worn end while at the same time making notches for the new segment on drill bits with diameters from 2-1/8” up to 28” with a length of up to 22”. The Diatip system cuts all bit seats perfectly true to the threads with a clean edge ready for segment attachment. No lathe turning or face grinding are required, saving both time and money.

The CD7-28 can be equipped with a hydraulic motor for the cutting, an extension to accommodate up to 40” diameter bits, and an extension for bits up to 40” long. Includes 24mm knife and matrice. Other sizes sold separately.
      Benefits of Re tipping            
  • Saves Money
    Less than half the money paid for a new bit constitutes the segments. The balance of the costs is the expense of the steel, shipping, etc.

  • Provides Maximum Flexibility
    In addition to saving money by retipping you will be able to meet your special drilling requirements by customizing the bit length and number of segments as your special jobs require.

  • It’s Easy
    The process doesn’t take extensive training or strength - anyone can do it. The indexing disc gives full control of the number of segments and positioning. The process is so easy it can be learned in an afternoon. Keep your employees busy and productive during slow times by having them retip core bits.

  • Environmentally friendly
   
   
CD 7-28 Manual
Bit Diameter Capacity
2-1/8” to 28”
Core Bit Maximum Length
22"
Maximum Steel Thickness
.125"
Part #
DR5002
                                           
   
Retipping Accessories
Description
Part #
Silver Solder (flat strip)
151333
 
151141
Hydraulic Kit
DR5004
Matrice 1-3/8” - 2-1/2” dia 16 mm seg
151325
Matrice 25.4mm 152110
CD7-28 Ext. 18”
151181
CD7-28 Ext. 12”
151193
Knife 16 mm seg.
151326
Knife - 24mm seg.
151168
Knife - 25.4mm seg. 152111
   
       
             
         
CD 600 Economy
   
 
Excellent for more occasional retipping or the small repair shop. Can take core drill bits up to 28” in diameter and 28” in length. Also the CD 600 can be equipped with a hydraulic motor for the cutting and extension for bits up to 36” long.
Includes 24mm knife and matrice. Other sizes sold separately.
 
 
CD 600 Economy
Bit Diameter Capacity
2-1/8” to 28”
Core Bit Maximum Length
22"
Maximum Steel Thickness
.125"
Part #
DR5003
       
Retipping Accessories
Description
Part #
Silver Solder (flat strip)
151333
   
Hydraulic Kit
DR5004
Matrice 1-3/8” - 2-1/2” dia 16 mm seg
151325
Matrice 25.4mm 152110
   
CD 600 Ext. 36”
151238
 
Knife 16 mm seg.
151326
Knife - 24mm seg.
151168
Knife - 25.4mm seg. 152111
     
                                     
     
                     
      CD 7-28 Grande              
      With the many of the same features as the CD 7-28 Automatic above, the CD 7-28 Grande is designed to accommodate even larger diameter core bits.
     
CD 7-28 Grande
Bit Diameter Capacity
2-1/8” to 60”
Core Bit Maximum Length
22"
Amps/Volts
110V/60Hz
Maximum Steel Thickness
.125"
Part #
DR5000
                               
   
CD 7-28 Automatic
 
For the retipping of old core bits, repairs of single lost segments or manufacturing of new core bits. Cuts off the worn end and makes the index regulated seats for the segments completely automatic. The CD 7-28 is equipped with a hydraulic motor for the cutting and a PLC controlled electric motor for the rotation. The machine can cut from 4 to 99 seats for the segments. After the cutting is completed, the bit can remain mounted on the machine where the rotation of the core bit can be easily regulated by a foot pedal control during the brazing process. Both hands are then free for the silver and gas pistol.
CD 7-28 Automatic
Bit Diameter Capacity
2-1/8” to 28”
Core Bit Maximum Length
22"
Amps/Volts
110V/60Hz
Maximum Steel Thickness
.125"
Part #
DR5001
Retipping Accessories
Description
Part #
Silver Solder (flat strip)
151333
   
Hydraulic Kit
DR5004
Matrice 1-3/8” - 2-1/2” dia 16 mm seg
151325
CD7-28 Ext. 18”
151181
CD7-28 Ext. 12”
151193
Knife 16 mm seg.
151326
Knife - 24mm seg.
151168
     
   
 
             
Back 1 Page Next Page