Horizontal CSS3 Menus Css3Menu.com

Diatip™ CD 7-28 Automatic Core Bit
Retipping Machines

2-1/8" - 28" Bit Diameter

Part No. DR5001


CD 7-28 Automatic

For the retipping of old core bits, repairs of single lost segments or manufacturing of new core bits. Cuts off the worn end and makes the index regulated seats for the segments completely automatic. The CD 7-28 is equipped with a hydraulic motor for the cutting and a PLC controlled electric motor for the rotation. The machine can cut from 4 to 99 seats for the segments. After the cutting is completed, the bit can remain mounted on the machine where the rotation of the core bit can be easily regulated by a foot pedal control during the brazing process. Both hands are then free for the silver and gas pistol.

Diatip™ Accessories
Description Part No.
Hydraulic Motor DR5004
Superstrong Flux Magnet - each magnet has four different side clearances: 0.02”/0.03”/0.04” and 0.05” (0.5mm/1.0mm & 1.25mm)(Standard for segments 2” - 16”) 151167
US magnet, each magnet has four different side clearances: 0.06”/0.07”/0.08”/ and 0.09” (1.5mm/1.78/2.03mm/2.3mm (for larger segments) 151627
Silver Solder (flat strip) 49% Silver 151333
Matrice 1-3/8” - 2-1/2” dia 16 mm seg 151325
Knife 16 mm seg. 151326
Knife - 24mm seg. 151168
CD7-28 Ext. 18” 151181
CD7-28 Ext. 12” 151193
CD 600 Ext. 36” 151238