|
|  |
|
|
|
|
| Flat Saw Blades |
|
 |
Recommendation Chart |
Flat Saws Wet/Dry |
Flat Saws Wet |
| |
<13hp FL |
<24hp FL |
25-65hp FM |
35-65> FH |
| Cured Concrete |
| w/flint concrete / river gravels / critically hard aggregates, w/heavy steel reinforcements |
|
|
|
|
| w/ medium to hard aggregates river gravels, granite, quartz, etc. |
|
|
|
|
| medium/hard aggregates limestone, sandstone, marbles |
|
|
|
|
| Green Concrete/Asphalt over Concrete |
| asphalt overlay |
|
|
|
C54 |
| w/quartz, river gravel, granite |
|
|
|
|
| lime stone, medium hard aggregates |
|
|
|
|
| Asphalt |
| General purpose asphalt cutting |
|
|
|
|
| Long life in very abrasive asphalt |
|
|
|
|
12" - 28" concrete blades are narrow key slot cores and
30" and above are wide U-slot cores |
Curb Cut Blades - C42: Specifically developed for curb cutting applications.
| Flat Saw Segmented Dry/Wet - C22 C23 C24 Blades |
 |
 Premium
An excellent initial value, these premium blades come in three specs – one is right for the type of cured concrete you need to cut.
C22 - Cured Concrete with critically hard aggregates
and heavy steel reinforcing.
C23 - Medium-hard aggregates.
C24 – Medium aggregates
  |
.335" |
Diameter & Width |
Part # |
| |
C22 |
C23 |
C24 |
| 12” x .125” x 1” |
D12036 |
D10011 |
D10002 |
| 14” x .125” x 1” |
D12039 |
D10014 |
D10005 |
| 18” x .135” x 1” |
D12042 |
D12020 |
D12005 |
| 20” x .135” x 1” |
D12045 |
D12023 |
D12008 |
|
| Flat Saw Segmented Dry/Wet - G25 A28 Blades |
 |
Premium
Harder segment configuration is designed for longer life and fast, effieient cutting soft abrasive materials such as green concrete and asphalt when low initial cost is more important than cost per inch/foot cut.
G25 – Green concrete
A28 – Green/Asphalt
|
.335" |
Diameter & Width |
Part # |
| |
G25 |
A28 |
| 12” x .125” x 1” |
D22002 |
D24021 |
| 14” x .125” x 1” |
D22005 |
D24002 |
| 18” x .125” x 1” |
D24034 |
D24005 |
| 20” x .125” x 1” |
D24037 |
D24008 |
|
| Flat Saw Segmented Dry/Wet - C32 C33 C34 Blades |
 |
Super Premium
Choose from three specs – one is right for the type of cured concrete you need to cut.
C32 – Cured concrete with critically hard aggregates and heavy steel reinforcing
C33 – Medium-hard aggregates
C34 – Medium aggregates
|
.393" |
Diameter & Width |
Part # |
| |
C32 |
C33 |
C34 |
| 12” x .125” x 1”-20mm |
D10019 |
D10012 |
D10003 |
| 14” x .125” x 1”-20mm |
D10020 |
D10015 |
D10006 |
| 14” x .250” x 1” |
|
D12062 |
|
| 14” x .375” x 1” |
|
D12063 |
|
| 16” x .125” x 1”-20mm |
D10021 |
D10018 |
D10009 |
| 18” x .135” x 1”-20mm |
D12043 |
D12021 |
D12006 |
| 20” x .135” x 1”-20mm |
D12046 |
D12024 |
D12009 |
| 24” x .165” x 1”-20mm |
D12049 |
D12027 |
D12012 |
| 26” x .165” x 1”-20mm |
D12052 |
D12030 |
D12015 |
|
| Flat Saw Segmented Dry/Wet - G35 A38 Blades |
|
Super Premium
These Super Premium blades give you lower cost per inch/foot cutting of soft, abrasive materials. Features Tungsten inserts for undercutting protection.
G35 – Green concrete
A38 – Green/Asphalt
|
.393" |
Diameter & Width |
Part # |
| |
G35 |
A38 |
| 12” x .125” x 1”-20mm |
D22003 |
D24022 |
| 14” x .125” x 1”-20mm |
D22006 |
D24003 |
| 16” x .125” x 1”-20mm |
D22009 |
D24045 |
| 18” x .135” x 1”-20mm |
D24035 |
D24006 |
| 20” x .135” x 1”-20mm |
D24038 |
D24009 |
|
| Flat SawSegmented Dry/Wet - C42 C43 ARIX Blade |
|
High Performance
ARIX technology gives you maximum productivity with the lowest possible cost per inch/foot cut. Diamonds are individually placed in strategic positions to maximize cutting performance.
C43 – Cured Concrete with critically hard aggregates and heavy steel reinforcing.
C42 – Faster Cutting
 |
.393" |
Diameter & Width |
Part # |
| C42 Turbo |
14” x .125” x 1”-20mm |
D10059 |
| 14” x .125” x 20mm |
D10060 |
| C43 |
| 12” x .125” x 1”-20mm |
D10058 |
| 14” x .125” x 1"-20mm |
D10053 |
| 16” x .125” x 1”-20mm |
D10054 |
| 18” x .125” x 1" |
D10055 |
| 20” x .125” x 1” |
D10056 |
| C43 AX |
| 14” x .125” x 20mm |
D10069 |
| 16” x .125” x 20mm |
D10070 |
|
|
|
|
|
|
|
|
|
|
 |
ARIX Diamond Arrangement Technology
Learn how a diamond blade that delivers 30% more blade life and 50% faster cutting speeds is changing the industry.
Find out more |
| |
|
