|
|  |
|
|
|
|
| Floor Prep Equipment |
 |
|
|
| TEQ-Edge Grinder |
  
|
Features:
- Wet or Dry
- Full floating head
- 8” diamond disc
- Vacuum connection
- Central water feed
- Fold-down handles
- Raise & lower
- Single phase electric motor with thermal overload
- 5.5 hp Honda model or 2 hp Electric
- Convenient location for on/off
- Fully powder coated/zinc plate
- 50’ 10 gauge ext. included with electric only
Ideal for :
- Removing paint, epoxy, thinset, urethane coatings and cut back adhesives
- Repairing worn, damaged or spalled concrete
- Leveling uneven or curling slabs
- Grinding hard surfaces, featheredging sidewalks, gutters and similar surfaces
- Grinding high and uneven joints
- Removing excess surface material
- Leveling patches of plastic overlays or grout
- Fast grinding of rough, uneven slab surfaces and drainage control
|
| Motor |
2hp |
5.5 Honda |
| Phase |
Single |
Gas |
| Full Load AMPS @115V |
18.4 |
|
| RPM - Disc |
2800 |
2800 |
| Grinding Wheel |
8” |
8” |
| Model |
FGE 2L |
FGG 5H |
| Weight |
120lbs |
110lbs |
| Part # |
G00002 |
G00003 |
| 8”grinding disc (10 Seg) |
D91003 |
Included |
| Description |
Item # |
| Replacement Rubber Isolator* |
160013 |
| * Required for replacement heads |
|
| Floor Grinding Heads |
|
Use for fast, free grinding of concrete on a floor grinder. Universal bolt pattern fits most single-head grinders.
FGG - General Purpose Grinding
FGP - General Purpose Polishing
FGG34 - Concrete & Asphalt removal
The TEQ-Edge Grinder requires an 8” grinding head. |
| Diameter & Width |
Part # |
FGG34 10 Segments FG
8”x3/4”x3/8”-24 threads - coarse grit |
D91003 |
FGP35 10 Segments FG
8”x3/4”x3/8”-24 threads - med. grit |
D91005 |
FGG25 20 Segments FG
10” x 3/4” x 3/8”-24 threads |
D91001 |
FGG15 10 Segments FG
10” x 3/4” x 3/8”-24 threads |
D91002 |
FGG34 16 Segments FG
Super Premium Segment
10”x3/4”x3/8”-24 threads |
D91004 |
| Accessories |
Item # |
| Replacement Brushes |
160110 |
|
| TEQ-Lok System for TEQ-Edge Grinders |
|
Easy to use with our TEQ-Edge Grinders. Multiple Grit segments allow maximum versitility with a variety of substances.
The TEQ-Edge Grinder requires an 8” grinding head.
|
Item # |
Description |
Spec |
160222 |
8” Steel Plate |
|
D91101 |
PCD Segment (PCDS-2PCS) |
PCDS-32 |
D91102 |
PCD Segment (PCDS-3PCS) |
PCDS-33 |
D91103 |
Diamond Segment (20/25 Grit) |
GREY |
D91104 |
Diamond Segment (30/40 Grit) |
BLUE |
D91105 |
Diamond Segment (60/80 Grit) |
RED |
D91106 |
Diamond Segment
(120/140 Grit) |
ORANGE |
|
| PCDC-35, PCDC-39 Cups |
|
Great for Epoxy glues.
|
| Item # |
PCD Cups |
| D83201 |
4” PCDC-35 |
| D83202 |
7” PCDC-39 |
|
| Concrete Grinder/Edger |
|
Features:
- 5” diameter
- Removes paint, epoxy, glue & other hard coatings
- Smooth rough surfaces
- Cleans concrete before applying new paint or coatings
- Held by two side handles
- Ergonomic “H” design
- Motor set above the grinding wheel in a dust-free zone, resulting in longer tool life
- Removable front dust guard for finishing concrete floors into the corners & edges
|
| Speed |
10,000 RPM |
| Diameter |
5” (125mm) |
| Grinding Wheel |
5” |
| AMPS @1500 Watts |
14 |
| Model |
TG-HD5 |
| Weight |
9 lbs/4.1 KG |
| Part # |
G30001 |
| Description |
Part # |
| Complete Package Vac/5" cup (D81024) |
G30003 |
| Accessories |
Item # |
| Walk-Behind Cart |
160058 |
| Vacuum |
150723 |
| 5" Storm Cup Wheel |
D81023 |
|
|
| 10" Walk Behind Scarifier |
|
Ideal for aggressive removal of material, production scarification and heavy coatings removal. Scarifier will clean, texture, level, groove and remove. For removal of paint strips, traffic lines and highway strips.
|
| Engine |
Robin |
Leeson |
Honda |
| Horsepower |
9hp |
2hp |
9hp |
| Part # |
G00008 |
G00006 |
G00007 |
| Price includes 6 point Tungsten Carbide cutting head assembly. |
| Acessories |
Part # |
| Tungsten Carbide Cutters |
|
| Milling Carbide Cutters |
|
|
| 18" Surface Grinder |
|
Gasoline or electric powered surface grinder features various grinding systems designed for breaking up deposits of grease, dirt, rubber carpet backing and industrial residues; cleaning concrete asphalt and tiles; producing exposed aggregate slabs; and buffing and polishing more delicate terrazzo and marble floor surfaces.
Contact us for more information & additional new floor preparation products. |
| Model |
|
|
| Engine |
Honda |
Leeson |
| Horsepower |
5.5hp |
2hp |
| Part # |
G00005 |
G00004 |
| Accessories |
Part # |
Application |
Set |
| 4” Storm Cup wheels |
|
Faster Production |
3 |
| 4” Storm Cup wheels |
|
Smooth Finish |
6 |
| 7” Storm Cup wheels |
|
Faster Production |
3 |
| Polishing Pads |
|
Smoothest Finish |
|
|
| Crack Chasing Blade - CR C35 Beveled Crack Chaser Blade |
 |
 Super Premium
 
|
.393" |
Diameter & Width |
Part # |
| 4” x cont. type x 5/8”-11 thrd |
D90001 |
| 4” x .375” x 7/8”-5/8” |
D90002 |
| 5” x .375” x 7/8”-5/8” |
D90003 |
| 7” x .375” x 7/8”-5/8” |
D90004 |
| 8” x .375” x 1” |
D90005 |
|
|
|
|
|
|
|
|
|
 |
ARIX Diamond Arrangement Technology
Learn how a diamond blade that delivers 30% more blade life and 50% faster cutting speeds is changing the industry.
Find out more |
| |
|
