| Hammer Drills / TEQ-Hammer |
|
|
|
 |
| |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
TEQ-Hammer Features: |
|
|
|
|
|
- Multi-function 3-mode - Hammer Rotary Drill, Rotary
Drill and Hammer.
- One-touch sliding chuck for easy bit installation and
removal (SDS-Plus).
- Heavy-duty hammer drill capability - 1” when drilling
in concrete.
- Rotates and locks chisel into many different positions
to optimize working angle.
- Fastest, strongest drilling speed for its class.
- Durable - Dustless design prevents armature failure.
- Lightweight - Weighs only 5.5 lb.
- Compact design with ergonomic grip.
- Conveniently located and easy-to-use function switch
on side of tool.
- Anti-vibration and low recoil design.
- Long lasting carbon brushes - typically last over 150
hours before needing replacement.
- Optimum heat dissipation provided by efficient air
flow design.
- Includes storage case, side handle and depth stop.
|
|
|
|
|
|
|
|
|
|
For Use by:
Concrete Sawing and
Drilling Contractors
General Contractors
Electricians
Heating and Cooling
Contractors
Plumbers
Landscaping Contractors
Pest Control Contractors
Machine Installers
Woodworkers and Carpenters
Utility and Maintenance Crews
and more |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TEQ-Hammer Specifications |
| Motor |
Single phase |
| Amps |
7A |
| Rated Power |
800 Watts |
| Power Supply |
110-120V 50/60 Hz |
| Bit capacity (Max) |
1” (concrete) |
| No-Load Speed (forward) |
1100 RPM |
| Variable Speed |
Forward and Reverse |
| Full Load Impact Rate/Min |
5200 BPM |
| Impact Force |
3j / 2.2 ft lb |
| Tool Holder |
SDS Plus |
| Net Weight |
5.5 lbs. |
| Model # |
RHD-263 |
| Part # |
DR2017 |
|
|
Limited time offer!
$113.00ea.
+ Freight.
Call DITEQ to order
limited to stock on hand. |
Includes
storage case |
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
TEQ-Hammer II
SDS Max®
|
 |
|
|
-
Low noise and vibrationby DITEQ damping mechanism
-
Electronic speed control minimizes speed loss for work
-
Pre-set variable speed dial with 6 settings to match the bit speed
-
Soft start & restart function for safety
-
Onetouch sliding chuck for eask bit installation and removal
-
L.E.D. Service light indicates when carbon brushes need to be replaced
-
L.E.D. powerlight indicates the cord breakage or switch failure
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TEQ-Hammer II SDS-Max |
| Motor |
Single phase |
| Rated Power |
1100 Watts |
| Hertz |
50/60 Hz |
| Bit capacity (Max) |
1-9/16” (concrete) |
| No-Load Speed (forward) |
235-500 RPM |
| Variable Speed |
6 Position |
| Full Load Impact Rate/Min |
1350-2870 BPM |
| Impact Force |
9.5j/7 ft lb |
| Tool Holder |
SDS-Max |
| Net Weight |
13 lbs. |
| Model # |
PHD-40M |
| Part # |
DR2022 |
|
|
|
|
|
|
|
|
|
|
Includes
storage case |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
