| Resource Center - Instructions & Warnings |
This information is provided with all Diamond Tool packaging. Please read and understand all instructions and warnings provided with each tool.
Warning!
This product contains some or all of the following:
| aluminum oxide |
baron carbon |
chrome |
| cobalt |
copper |
diamond |
| iron |
manganese |
molybdenum |
| nickel |
phosphorous |
silicon |
| silicon carbide |
silver |
steel |
| tungsten |
tungsten carbide |
|
This product as sold presents no hazard, although sawing, drilling, grinding and other construction activities may release small amounts of metal into the dust of slurry generated. Dust and slurry generated may contain other chemicals from materials cut. By example only, silica (SiO2) may be present in cement and other masonry products.
Precautionary steps, including appropriate respiratory protection and other control methods should be taken to ensure that worker exposure to dust not exceed appropriate PEL or TVL. (Reference OSHA 29 CFR Part 1910.1200).
Prolonged exposure to excessive amounts of dust can cause:
- Respiratory disease from inhalation; including pulmonary fibrosis;
- Skin irritation and rash from contact.
Nickel and certain compounds, which may be present in certain products, are considered carcinogenic by NTP and IARC.
For additional information refer to MSDS or contact the manufacturer.
Prop 65
Warning!
The use of this product can cause the exposure to a chemical or chemicals know to the State of California to cause cancer and/or birth defects or other reproductive harm.
Prop 65
Warning!
This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
Warning!
Improperly used grinding wheels, wire brushes, blades and bits are dangerous.
Warning!
Comply with ANSI B7.1 and OSHA 29 CFR 1900-1910 et al covering speed, safety guards, flanges, mounting procedures, general operating fuels, handling, storage, inspection and general machine conditions.
|
