| Shibuya Hydraulic Core Drills |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydraulic Core Drill Features:
DITEQ expands its substantial line of Shibuya core drills with
hydraulic core drill motors that come in four speeds and can drill up
to 32” diameter holes.
These compact motors deliver reliable power to perform over a
broad range of professional applications. Designed to work with the
Shibuya hydraulic powerpack, these units are part of an integrated
system with the industry’s most extensive line of accessories. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Powerful compact motor
- Highly efficient power unit
- Relief valve for added protection
- Fine incremental control of power
- Spindle thread A-rod
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| All Shibuya hydraulic motors are complete with spindle unit and flow control valve manifold.
Spindle thread is A-rod and every hydraulic motor comes with 2 A-rod adaptor female to 1-1/4”-7 male thread adaptor.
Quick release shown is not included |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydraulic Core Drill |
| Motor |
OMS80 |
OMS160 |
OMS250 |
OMS400 |
| Displacement |
80cc |
160cc |
250cc |
400cc |
| RPM |
500 at 10 gpm |
250 at 10 gpm |
160 at 10 gpm |
100 at 10 gpm |
| Max. Bit Cap. |
8” |
16” |
24” |
32” |
| Column Size |
2-3/8” |
2-7/8” |
2-7/8” |
2-7/8” |
| Column Length |
39.4” |
43” |
43” |
43” |
| Model # |
TS-420H |
TS-540H |
TS-660H |
TS-680H |
| Part # |
DR1026 |
DR1027 |
DR1028 |
DR1029 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Link to Price Book Page |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydraulic Powerpack |
 |
|
|
|
|
|
|
|
|
|
The Shibuya hydraulic power pack is powered by an electric start, 18HP
V-twin air-cooled OHV Subaru engine and produces 10 gpm at 2000 PSI |
|
|
|
|
|
|
|
Features: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 4 hour run time
- Large muffler shielded from fuel
and oil contact
- Isolated engine mounts
- Low engine oil light and
shutdown
- Zinc coated fuel tank
- Fuel gauge
- Hour meter
- Fuel overflow safety channel
- Isolated fuel tank mounts
- In-tank fuel strainer
- In-line fuel filter
- Fuel shut-off valve
- Full round tube roll cage
frame design
|
- Lifting handles angled 2° for
easy lifting
- Angled frame design for walking
clearance when moving unit
- 5.6 gallon hydraulic reservoir
- Variable flow control
- -15° c engine operating range
- 1987 PSI maximum constant
pressure
- Variable pressure control
- Water cooled hydraulic oil
cooler - 2.6 GPM flow minimum
- Aluminum valve block design -
only 3 hydraulic hoses
- Solid rubber tires
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
| |
|
|
|
Hydraulic Powerpack |
| ENGINE |
Subaru EH-63DS |
| HORSE POWER |
18 - gas |
| FUEL CAPACITY |
4.5 gal. |
| BATTERY |
12V |
| HYDRAULIC SYSTEM |
10 GPM at 2000 PSI |
| RESERVOIR TANK |
23 qts |
| DRY WEIGHT |
363 lb |
| WEIGHT WITH OIL |
396 lb |
| Part # |
151275 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Link to Price Book Page |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick Release |
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydraulic Motors only |
| MOTOR |
Danfoss OMS80 |
Danfoss OMS160 |
Danfoss OMS250 |
Danfoss OMS400 |
| Displacement |
80cc (4.9cc in) |
160cc (9.8cc in) |
250cc (15.3cc in) |
400cc (24.0cc in) |
| RPM’S |
500rpm at 10gmp |
250rpm at 10gmp |
160rpm at 10gmp |
100rpm at 10gmp |
| BIT DIAMETER |
200mm (8”) |
400mm (16”) |
600mm (24”) |
800mm (32”) |
| Part # |
151261 |
151262 |
151263 |
151264 |
Hydraulic Motors Assemblies |
| Part # |
151271 |
151272 |
151273 |
151274 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Assemblies include motor spindle, flow control, adapter plate and disconnect. |
|
|
|
|
|
|
|
|
Link to Price Book Page |
|
|
|
| Accessories |
Part # |
| Adapter –1-1/4-7”male – A - rod female |
151276 |
| Quick Release |
150039 |
| Flow Control Valve Manifold |
151269 |
| Pillow Block Assembly - A-rod Spindle |
151270 |
| Hydraulic Hose 30’ x 1/2” set of 2 |
151277 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
