|
|  |
|
|
|
|
| Universal Blades |
|
 |
Universal/Segmented: Use for fast cutting at low initial cost on a wide variety of materials including: concrete, masonry and some stone (where some chipping is acceptable). Not recommended for continuous cutting in green concrete and asphalt.
Universal/Turbo: Use for fast, free, smooth cutting on a wide variety of medium-to-hard materials including: concrete, masonry and stone. Not recommended for continuous cutting in soft, abrasive materials such as block green concrete or asphalt.
Click on the blades below for more information. |
Do-It-All Blades
|
ARIX Do-It-All Blades
|
Economy
|
Specialty
|
Flat Saw/High Speed
|
|
| Universal Segmented Dry/Wet - C33 Max Wave |
 |
 Super Premium
The unique segment design provides excellent quick-start cutting. The wavy segments and rounded key slots circulate air faster for improved cooling to eliminate wobble and make straight cutting easier.
   |
 .393" |
Diameter & Width |
Part # |
| 12” x .125” x 1”-20mm |
D10046 |
| 14” x .125” x 1”-20mm |
D10047 |
|
| Universal Segmented Dry/Wet - U23 Turbo Blade |
 |
Premium
Use for fast, free, smooth cutting on a wider variety of medium-to-hard materials including: concrete, masonry and stone.
|
 .335" & 393" |
Diameter & Width |
Part # |
| Segment Height .335" |
| 4” x .080” x 7/8”-5/8” |
D41015 |
| 4.5” x .080” x 7/8”-5/8” |
D41016 |
| 5” x .080” x 7/8”-5/8” |
D41017 |
| 7” x .080” x DM-7/8”-5/8” |
D41018 |
| 8” x .095” x DM-7/8”-5/8” |
D41019 |
| 9” x .095” x 7/8”-5/8” |
D41020 |
| 10” x .095” x DM-7/8”-5/8” |
D41021 |
| Segment Height .393" |
| 12” x .125” x 1”-20mm |
D41002 |
| 14” x .125” x 1”-20mm |
D41004 |
| 16” x .125” x 1”-20mm |
D41006 |
|
| Universal Segmented Dry/Wet - B33 Split Turbo Blade |
 |
Super Premium
The narrow U-slots and split turbo segment design gives the Duece unusually fast, free, smooth cutting on a wide variety of harder materials including: concrete, stone, granite and brick. Not recommended for continuous sawing of soft abrasive materials such as light weight concrete block or asphalt.
|
.354" |
Diameter & Width |
Part # |
| 12” x .125” x 1”-20mm |
D41008 |
| 14” x .125” x 1”-20mm |
D41010 |
| 16” x .125” x 1”-20mm |
D41012 |
|
| Universal Segmented Dry/Wet - C23 Blade |
 |
Premium
Firestar blades feature curved diamond wedges which protrude deep into the core to provide additional protection from side wear of the core. An excellent choice for curved cuts and cutting green concrete on early-entry saws. Also good for fast, free, smooth cutting on a wide variety of harder materials including: concrete, stone, granite and brick.
|
.354" |
Diameter & Width |
Part # |
| C23 Firestar - 4” x .070” x 7/8”-5/8” |
D57110 |
| C23 Firestar - 4.5” x .070” x 7/8”-5/8” |
D57111 |
| C23 Firestar - 5” x .080” x 7/8”-5/8” |
D57107 |
| C23 Firestar - 7” x .095” x DM-7/8”-5/8” |
D57101 |
| C23 Firestar - 8” x .095” x DM-7/8”-5/8” |
D57102 |
| C23 Firestar - 12” x .110” x 1”-20mm |
D57103 |
| C23 Firestar - 14” x .125” x 1”-20mm |
D57104 |
|
| Universal Segmented Dry/Wet - C43 ARIX Blade |
|
High Performance
ARIX diamond blades typically last twice as long and cut 30% faster than the most popular blades in the industry. Individual diamonds are precisely arranged throughout each segment to provide unparalleled performance. ARIX C43 is the best choice for a wide variety of materials, including hard concrete with heavy steel reinforcing.
|
.393" |
Diameter & Width |
Part # |
| 12” x .125” x 1” 20mm |
D10058 |
| 14” x .125” x 1” 20mm |
D10053 |
| 14” x .125” x 1” Noise Killer |
D10079 |
| 14” x .125” x 20mm |
D10069 |
| 16” x .125” x 1” 20mm |
D10054 |
| 16” x .125” x 20mm |
D10070 |
| 18” x .125” x 1” |
D10055 |
| 20” x .125” x 1” |
D10056 |
|
| Universal Segmented Dry/Wet - C44 ARIX Blade |
|
High Performance
The new ARIX C44 is the best choice you can make for cutting the widest array of materials; everything from hard concrete with steel reinforcing to green concrete, asphalt, brick, block and more! Undercut protection helps this hard-cutting ARIX spec deliver longer life on softer materials.
|
.393" |
Diameter & Width |
Part # |
| 14” x .125” x 1” 20mm |
D10082 |
|
| Universal Segmented Dry/Wet - XTEQ Blade |
 |
High Performance
ARIX technology gives you maximum productivity with the lowest possible cost per inch/foot cut. Diamonds are individually placed in strategic positions to maximize cutting performance.
|
.393" |
Diameter & Width |
Part # |
| 14” x .125” x 1” 20mm |
D11012 |
|
| Universal Segmented Dry/Wet - C42 ARIX Turbo Blade |
|
High Performance
ARIX technology gives you maximum productivity with the lowest possible cost per inch/foot cut. Diamonds are individually placed in strategic positions to maximize cutting performance.
|
.393" |
Diameter & Width |
Part # |
| 14” x .125” x 1” 20mm |
D10059 |
| 14” x .125” x 20mm |
D10060 |
|
|
|
|
|
|
|
|
|
|
 |
ARIX Diamond Arrangement Technology
Learn how a diamond blade that delivers 30% more blade life and 50% faster cutting speeds is changing the industry.
Find out more |
| |
|
