- Product Highlights
- Overview
-
ABOUT
Guard Sealer Polish is formulated to provide the ultimate in concrete protection by using both dual-action technology and hybrid polymers. Guard Sealer Polish is environmentally friendly, VOC- compliant, and provides increased stain suspension and resistance against most contaminants found in kitchens, retail food stores, restaurants, malls, garages, warehouses, distribution centers, etc. While originally formulated to be used in conjunction with hardened concrete floor systems, Guard Sealer Polish may also be used anywhere a clear, high-gloss, dual-action concrete protection system is desired. Guard Sealer Polish is designed for use on previously sealed surfaces, as well as surfaces that have been previously stained or dyed and sealed..DIRECTIONS
A small test patch application is always recommended. The test patch must be done using the same applicator, equipment, surface preparation, application technique, and at the same temperatures, relative humidity, airflow conditions, etc., that will exist at the time of the full-scale application. The surface must be thoroughly clean, dry and free of anything that will prevent Guard Sealer Polish from bonding properly with the concrete. Polished Concrete: Guard Sealer Polish may be applied over concrete that has been previously treated with a densifier/hardener. Best results are obtained if the surface is burnished two hours after application. Guard Sealer Polish can be diluted 1:1 with water. Existing Concrete: Guard Sealer Polish should be used full strength on existing concrete (no dilution necessary). Concrete must be a minimum of seven days old before applying. Application Method: Application equipment must be clean, dry and free of any previously used materials. After initially spraying the product onto the surface, uniformly spread it with a micro-fiber applicator. The micro-fiber pad should be prewetted with Guard Sealer Polish prior to use, and the product must not be allowed to dry before spreading is complete. Optimum performance is achieved with two uniform coats. The second coat should be applied at a 90° angle to the first coat, only after the first coat is thoroughly dry – typically one hour after application, depending on temperatures and conditions. NOTE: Keep surface dry for a minimum of 48 hours after application; full stain blocking ability will not be effective until 72 hours after final application. Cleanup: If product is still wet, equipment can be cleaned with soap and water. Once dried, the material can be removed with a solvent, such as xylene or toluene. - Specs
-
Additional Information
SKU 163448 Chemical Use Sealer Container Size 1 Gal Bottle Made In United States Unboxed Weight No Shipping Weight No UPC BARCODE No - Brochures
- Reviews
-
You may also be interested in the following product(s)
-
TTB1620 Battery Floor Scrubbers, 20" Push
Call customer service or login for pricing -
TG516 | 115v | 16" Pad Driver
Call customer service or login for pricing -
TTV678 Vario Floor Scrubbers 26-30-34 in
Call customer service or login for pricing -
TT1120 Floor Scrubbers, 115V | 20"
Call customer service or login for pricing -
TTB1620T Self Propelled | Floor Scrubber | 20"
Call customer service or login for pricing -
TTB817 Battery Floor Scrubbers, 17 inch
Call customer service or login for pricing